RG-WS7110, Next-Generation High-Performance 10 Gbps Wireless Access Controller

Key Specification View More

Fitur

RG-WS7110 Next-Generation High-Performance 10 Gbps Access Controller

The RG-WS7110 can be applicable to large- and medium-sized network management and deployed on a Layer 2 or Layer 3 network, enabling visualized management and control of the wireless network.

Intelligent Load Balancing

Client-based load balancing, steering clients to less congested APs to prevent overload.
Band-based load balancing, steering clients to the 5 GHz frequency band to enhance bandwidth utilization.
Traffic-based load balancing, steering clients to APs with less traffic to increase the average bandwidth for client access.

Multiple Authentication Modes

MAB authentication: It frees a user from repeatedly entering the username and password that are required only upon first login.
Other authentication modes: 802.1X, Web-based, and PPSK authentication.

Unified Cloud Management

Unified management through WIS Cloud, eliminating the need for on-site provisioning.Real-time warning and intelligent troubleshooting, improving O&M efficiency.

Spesifikasi

Hardware Specifications

System specifications	RG-WS7110
Memory	4 GB
Flash memory	16 MB

Dimensions and Weight	RG-WS7110
Unit dimensions (W x D x H)	440 mm x 200 mm x 43.6 mm (17.32 in. x 7.87 in. x 1.72 in., without rack-mount brackets) 486.2 mm x 205 mm x 43.6 mm (19.14 in. x 8.07 in. x 1.72 in., including rack-mount brackets)
Rack size	1 RU
Unit weight	2.7 kg (5.95 lbs)
Shipping weight	3.5 kg (7.72 lbs)
Mounting	Rack-mount

Port Specifications	RG-WS7110
Fixed service port	8 x 10/100/1000BASE-T ports 2 x 1GE SFP/RJ45 combo ports ● RJ45 ports support 10/100/1000BASE-T. ● Port 9/MGMT can also be used as a management port. 2 x 10GE SFP+ ports
Fixed management port	1 x RJ45 console port 2 x USB 3.0 ports, compatibility with USB 2.0
Status LED	1 x system status LED 1 x power status LED 8 x 10/100/1000BASE-T port LEDs 2 x 1GE SFP/RJ45 combo port LEDs 2 x 10GE SFP+ port LEDs
Button	1 x Reset button ● Press the button for shorter than 3 seconds. Then the device restarts. ● Press the button for longer than 3 seconds. Then the device restores to factory settings.

Note

A combo port consists of an optical Ethernet port and an electrical Ethernet port on the panel and can be used as the optical or electrical port at one time. When either of the Ethernet ports is working, the other port is automatically shut down. You can select a port type as required.

Power Supply and Consumption	RG-WS7110
Maximum power consumption	30 W
Power input	100 V AC to 240 V AC, 50 Hz to 60 Hz
Power output	12 V/3.33 A

Environment and Reliability	RG-WS7110
Temperature	Operating temperature: 0°C to 45°C (32°F to 113°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude in the range of 1,800–4,000 m (5,905.51–13,123.36 ft.), every time the altitude increases by 166 m (544.62 ft.), the maximum temperature decreases by 1°C (1.8°F).
Altitude	Operating altitude: –500 m to +4,000 m (–1,640.42 ft. to +13,123.36 ft.) Storage altitude: –500 m to +4,000 m (–1,640.42 ft. to +13,123.36 ft.)
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% RH to 95% RH (non-condensing)

Software Specifications

Applicable Software Version	RG-WS7110
Applicable software version	RGOS11.9(6)W3B15

Performance Indicators	RG-WS7110
Default number of managed APs	32 Note: The default number of APs that can be managed by the RG-WS7110 is subject to the AP model. For details, see the Ordering Information.
Maximum number of configurable APs	2,048
Maximum number of managed APs	512 Note: The maximum number of APs that can be managed by the RG-WS7110 is subject to the AP model. For details, see the Ordering Information.
Maximum number of managed clients	5,120 Note: The maximum number of clients that can be managed by the RG-WS7110 is subject to the network environment. Contact technical support team for details.
Forwarding capacity	10 Gbps (subject to the wireless network environment)
VLAN	4,094
Maximum number of clients supported by the built-in Portal server	1,500
ACL	4,096
MAC address table	32,768
ARP table	32,768
Intra-AC roaming handoff time	< 50 ms

WLAN	RG-WS7110
IEEE 802.11 protocols	802.11, 802.11b, 802.11a, 802.11g, 802.11d, 802.11h, 802.11w, 802.11k, 802.11v, 802.11r, 802.11i, 802.11e, 802.11n, 802.11ac, and 802.11ax Layer 2 and Layer 3 topology supported between an AP and an AC An AP can automatically discover the accessible AC. An AP can be automatically upgraded through the AC. An AP can automatically download the configuration file from the AC. CAPWAP through NAT
Roaming	Intra-AC Layer 2 or Layer 3 roaming Inter-AC Layer 2 or Layer 3 roaming Intra-AC Layer 2 or Layer 3 roaming in local forwarding mode Inter-AC Layer 2 or Layer 3 roaming in local forwarding mode
Forwarding mode	Centralized forwarding Local forwarding Service-based flexible forwarding
Wireless QoS	AP/WLAN/STA-based bandwidth limiting (STA-based rate limit range: 8–261,120 in the unit of 8 kbps. For example, if you set the value to 8, the rate limit is 8 x 8 kbps = 64 kbps.) Static and intelligent rate limiting based on STA quantity Fair scheduling
User isolation	AC-based user isolation AP-based user isolation WLAN-based user isolation
Reliability	AC virtualization AC failover Multi-AC hot standby (1+1 A/A and A/S hot standby, and N+1 hot standby) Multi-AC cluster (N-to-N) Remote intelligent perception technology (RIPT) Non-stop service during upgrade
STA management	Access control based on the number of STAs associated with the AP Access control based on the number of STAs associated with the SSID Balanced access control based on the number of STAs associated with the AP Balanced access control based on the AP traffic Band steering Configuration of the RSSI threshold in dBm (range: 0–100) Configuration of the STA idle timeout period in seconds (range: 60–86,400)
WLAN optimization	Adjustment of the transmit power for beacon or probe response frames
RF management	Country or region code setting Manual setting of the transmit power Automatic setting of the transmit power Manual setting of the operating channel Automatic setting of the operating channel Automatic adjustment of the data rate Coverage Hole Detection AP load balancing based on traffic and STA quantity Band selection Radio frequency interference (RFI) detection and mitigation

Security	RG-WS7110
IPv4 security authentication	Web-based authentication 802.1X authentication MAB authentication
IPv6 security authentication	802. 1X authentication Web-based authentication
IEEE 802.11 security and encryption	Multi-SSID mode SSID hiding IEEE 802.11i-compliant PSK authentication WPA and WPA2 WEP (WEP/WEP128) TKIP CCMP ARP anti-spoofing
CPP	Supported
NFPP	Supported
WIDS	Supported
AP virtualization	Supported

Protocols	RG-WS7110
IPv4 protocols	Ping and Traceroute DHCP server, DHCP client, DHCP relay, and DHCP snooping DNS client NTP Telnet TFTP server and TFTP client FTP server and FTP client
IPv6 protocols	DNSv6 client DHCPv6 relay and DHCPv6 server TFTPv6 client FTPv6 server and FTPv6 client IPv6 CAPWAP ICMPv6 IPv6 ping Manual tunnels, automatic tunnels, and ISATAP Manually configured IP addresses and automatically created local addresses IPv6 traceroute Neighbor discovery
IPv4 routing	Static routing, RIP, and OSPF
IPv6 routing	Static routing

Management	RG-WS7110
Network management	SNMP v1/v2c/v3 RMON Syslog Remote probe
Network management platform	Eweb RG-WIS Wi-Fi heat map
User access management	Console port login, Telnet login, SSH login, and FTP upload

Regulatory Compliance	RG-WS7110
Safety regulation	IEC 62368-1, EN 62368-1
EMC regulation	EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, and EN 300 386

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Installation

Installation Guide

Software and Configuration

Configuration Guide

Informasi Pemesanan

Main Unit

Model

Description

RG-WS7110

The next-generation wireless access controller provides 8 x 10/100/1000BASE-T ports, 2 x 1GE SFP/RJ45 combo ports, and 2 x 10GE SFP+ ports.

It supports 32 licenses by default, and up to 512 licenses are available.

The maximum number of APs that can be managed by the RG-WS7110 is subject to the AP model:

● A generic AP occupies one license. The RG-WS7110 can manage up to 512 generic APs.

● A wall plate AP occupies half of the license. The RG-WS7110 can manage up to 1,024 wall plate APs.

● An i-Share micro AP occupies no license. The RG-WS7110 can manage up to 1,024 i-Share micro APs.

● The number of licenses occupied by an i-Share master AP is subject to the model. For details, see the Ordering Information in the datasheet of corresponding i-Share master AP.

Optical Transceivers

1GE

Model	Description
MINI-GBIC-ZX80-SM1550	1000BASE-ZX, SFP transceiver, 1550 nm, Duplex LC, 80 km over SMF
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, 1310 nm, Duplex LC, 40 km over SMF
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, 850 nm, Duplex LC, 500 m over MMF
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF
GE-SFP-LH40-SM1310-BIDI	1000BASE-LH, SFP transceiver, Tx1310/Rx1550, BiDi LC, 40 km over SMF
GE-SFP-LH40-SM1550-BIDI	1000BASE-LH, SFP transceiver, Tx1550/Rx1310, BiDi LC, 40 km over SMF
GE-SFP-LX03-SM1310-BIDI-I	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 3 km over SMF
GE-SFP-LX03-SM1550-BIDI-I	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 3 km over SMF

2.5GE

Model	Description
2.5G-SFP-LX03-SM1310-BIDI-I	2.5GBASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 3 km over SMF
2.5G-SFP-LX03-SM1550-BIDI-I	2.5GBASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 3 km over SMF

10GE

Model	Description
XG-SFP-LR-SM1310	10GBASE-LR, SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF
XG-SFP-SR-MM850	10GBASE-SR, SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF
XG-SFP-AOC3M	10GBASE, SFP+ active optical cable (AOC), 3 m, including one cable and two optical transceivers
XG-SFP-AOC5M	10GBASE, SFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers
XG-SFP-LR10-SM1270-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1270/RX1330, BiDi LC, 10 km over SMF
XG-SFP-LR10-SM1330-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1330/RX1270, BiDi LC, 10 km over SMF

License

Model	Product Description
RG-LIC-WS-16	The number of capacity expansion licenses for the RG-WS series wireless controller can be expanded to 16. Each license supports one generic AP or two wall plate APs. For the number of licenses occupied by an i-Share master AP, see the Ordering Information.
RG-LIC-WS-32	The number of capacity expansion licenses for the RG-WS series wireless controller can be expanded to 32. Each license supports one generic AP or two wall plate APs. For the number of licenses occupied by an i-Share master AP, see the Ordering Information.
RG-LIC-WS-128	The number of capacity expansion licenses for the RG-WS series wireless controller can be expanded to 128. Each license supports one generic AP or two wall plate APs. For the number of licenses occupied by an i-Share master AP, see the Ordering Information.
RG-LIC-WS-512	The number of capacity expansion licenses for the RG-WS series wireless controller can be expanded to 512. Each license supports one generic AP or two wall plate APs. For the number of licenses occupied by an i-Share master AP, see the Ordering Information.
RG-LIC-WS-1024	The number of capacity expansion licenses for the RG-WS series wireless controller can be expanded to 1,024. Each license supports one generic AP or two wall plate APs. For the number of licenses occupied by an i-Share master AP, see the ordering information.

Education

5-Star Hotel Solution

RG-WS7110, Next-Generation High-Performance 10 Gbps Wireless Access Controller

RG-WS7110 Next-Generation High-Performance 10 Gbps Access Controller